The nozzle of your 3D printer is clogged and you can't clean it anymore? Just replace the nozzle with one of our new ones. We offer nozzles for 3D printers in different sizes made of stainless steel, brass or titanium. Change the diameter as well. We have nozzles with a nozzle diameter of 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm and 0.8mm. Of course depending on the type of nozzle.
The MK10 Nozzle is a further development of the widely used MK8. Contrary to all the Chinese suppliers, the MK10 is clearly different from the MK7 or MK8. The first thing you notice is that the MK10 system uses an M7 thread to allow a higher power transmission. From the outside, the MK10 is more similar to the MK8, but is manufactured wider. As always in life, it's what's inside that counts. The MK10 is designed for PTFE use and designed in such a way that the Teflon hose is inserted into the nozzle. The pressure temperature here must therefore be within the working range of the Bowden used (approx. 250° max). The intended advantage is that the filament cannot clog so much in the nozzle. If you want to convert to MK10, you will need the appropriate heating block and the corresponding throat for the nozzle.
Advanc3D's Premium Nozzles are a series of high quality replacement nozzles that will give you a noticeable difference when printing. A premium nozzle is, in a figurative sense, like a sharpened pencil - simply essential for perfect results!
All Advanc3D nozzles are made of the highest quality brass CuZn37, steel X 8 CrNiS 18-9 or titanium Ti-5Al-2.5Sn using the most advanced technology. All nozzles are manufactured with a tolerance below ± 0.01 mm. This results in a very smooth and uniform extrusion, which of course is noticeable in the print quality!
For best results, we recommend re-leveling your print bed after each nozzle change. Our nozzles also compatible with other 3D printers, but may have a different height.
Advanc3D nozzles are the perfect choice for enthusiasts who want to get more out of their 3D printer!
Features:
Type : MK10
Filament diameter: 1.75mm
Nozzle type: Bowden
Nozzle length: 13.2mm
Wrench size: 9mm
Nozzle thread: M7
Nozzle thread length: 4.3mm
Nozzle suitability: Not suitable for abrasive materials
Feature: Only suitable for hotends with M7 thread
Compatible with:
- FlashForge Creator Pro
- FlashForge Creator X
- FlashForge Dreamer
- Qidi Tech X-One
- Qidi Tech I
- Dremel Idea Builder
- PowerSpec 3D Pro
- PowerSpec 3D X
- Wanhao Duplicator 4S
- Wanhao Duplicator 4X
- Wanhao i3
- Monoprice Maker Select 3D Printer v2
- Monoprice Maker Select Plus
- Cocoon Create 3D Printer
There are no reviews yet.
