Advanc3D MK10 Nozzle in brass CuZn37 in 0.4mm for 1.75mm filament M7

The nozzle of your 3D printer is clogged and you can no longer clean it? Just replace the nozzle with one of our new ones. We offer nozzles for 3D printers in different sizes made of stainless steel, brass or titanium.change also the diameter. We have nozzles with a diameter of 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm and 0.8mm. Of course depending on the type of nozzle.

The MK10 Nozzle is a further development of the widely used MK8. Contrary to all the Chinese suppliers, the MK10 is clearly different from the MK7 or MK8. The first thing you notice is that the MK10 system relies on a M7 thread to enable a higher power transmission. From the outside, the MK10 looks more like the MK8, but is made wider. As always in life, it depends on the inside. The MK10 is designed for PTFE use and is designed so that the Teflon hose is inserted into the nozzle. The pressure temperature must therefore be within the working range of the Bowden used (approx. 250° max). The desired advantage is that the filament can not clog so much in the nozzle. If you want to upgrade to MK10, you will need the appropriate heating block and the corresponding throat for the nozzle.



The premium nozzles from Advanc3D are a series of high quality replacement nozzles that will give you a noticeable difference when printing. A high quality nozzle is figuratively like a sharpened pencil - simply indispensable for perfect results!
All Advanc3D nozzles are made of brass CuZn37, steel X 8 CrNiS 18-9 or titanium Ti-5Al-2.5Sn of the highest quality and using the most advanced technology. All nozzles are manufactured with a tolerance below ± 0.01 mm. This results in a very smooth and uniform extrusion, which is of course noticeable in the print quality!
For best results we recommend to re-level your print bed after each nozzle change. Our nozzles are also compatible with other 3D printers, but may have a different height.
Advanc3D nozzles are the perfect choice for enthusiasts who want to get more out of their 3D printer!

Features:
Type : MK10
Material: Brass CuZn37
Filament diameter: 0.4mm
Filament diameter: 1.75mm
Nozzle type: Bowden
Tube length: 13.2mm
Flare width: 9mm
Lens thread: M7
Cannelure thread length: 4.3mm
Suitability: Not suitable for abrasive materials
Feature: Only suitable for hotends with M7 thread

Compatible with:
- FlashForge Creator Pro
- FlashForge Creator X
- FlashForge Dreamer
- Qidi Tech X-One
- Qidi Tech I
- Dremel Idea Builder
- PowerSpec 3D Pro
- PowerSpec 3D X
- Wanhao Duplicator 4S
- Wanhao Duplicator 4X
- Wanhao i3
- Monoprice Maker Select 3D Printer v2
- Monoprice Maker Select Plus
- Cocoon Create 3D Printer